Industrial mist cooling systems for hot shop floors.
High temperatures slow people and machines, and process dust harms both. TrueMist industrial mist cooling systems use high-pressure pumps to turn water into a fine mist that cools work zones and settles airborne dust.
What industrial mist cooling delivers
Lower working temperature
Relief in summer for operators near furnaces, presses and roofs.
Less airborne dust
Mist settles fine particles from processing.
Fewer odours
Atomised water dilutes and settles odours.
Right humidity
Avoids overly dry air and static.
Protects equipment
Cooler, cleaner air around motors and panels.
Better productivity
Comfortable crews work steadily through the shift.
Low energy cost
A pump instead of refrigerated cooling.
Low maintenance
Simple pumps, filters and cleanable nozzles.
Fewer airborne microbes
Clean filtered water and regular flushing.
Designed around your process
We design industrial systems zone by zone: where people work, where heat comes from, how air moves through the building and where moisture must be avoided. Mist lines can run along trusses, over walkways or on misting fans aimed at workstations.
- Foundries, forging and heat treatment shops
- Glass, ceramic and steel rolling areas
- Warehouses, loading bays and logistics hubs
- Printing, packaging and paper units
- Assembly halls with metal roofs
What we check
- Heat sources and worker positions
- Roof height, ventilation and exhaust fans
- Electrical panels and moisture-sensitive machinery
- Water source and pre-filtration
- Shift pattern and controls
Good to know
- Mist is not suitable directly over live electrical equipment
- Closed halls need exhaust to remove humid air
- Hard water needs a pre-filter or softener
How a TrueMist project runs
A structured conversation before any equipment is proposed.
- 01
Describe the problem
Tell us what is happening, where and when.
- 02
Assess the conditions
Area, airflow, humidity, water and power on site.
- 03
Define the system
Pump, nozzles, lines, filtration and controls sized to the duty.
- 04
Install & validate
Commissioning checks against the agreed objective.
Related solutions and guides
Questions we are often asked
Do industrial misting systems generate enough moisture?
Yes. Nozzle count and pump flow are sized to the heat load so the zone gets enough evaporation without saturating.
Does the mist make the floor wet?
No – with high-pressure fine droplets and correct controls the mist evaporates before reaching the floor.
How often should nozzles be cleaned?
It depends on water quality and usage. With filtration many sites clean nozzles once or twice a season.
What are the connectors made of?
Stainless steel connectors are standard on industrial systems.
Should I use a pre-filter?
Yes, we recommend it, and offer it as an add-on, especially for borewell water.
Your application deserves the right system.
Share your operating conditions. Start with a conversation, not a pre-selected package.