PROBLEM GUIDE
Nozzles blocking? Fix the water, then the nozzle.
Spitting, uneven or dead nozzles are almost always a water-quality or filtration issue. The right filters, softening and a cleaning routine keep them clear.
What you notice
- Some nozzles spray, others drip or stop
- White scale on nozzle tips
- Pressure rising at the pump gauge
- Mist pattern uneven along the line
Common causes
- Hard borewell water causing calcium scale
- Debris from new lines or tanks
- Clogged or missing 5 micron filter
- Long idle periods
BEFORE YOU BUY
What to check before choosing a system
- Water source and hardness
- Filter condition and change date
- Nozzle material and orifice
- Running hours and idle periods
SOLUTIONS THAT FIT
Systems that solve this problem
Mist cooling systems
Flash-evaporating mist for open areas, sheds, patios and work zones.
High-pressure misting
Pump-driven 70 bar class systems for fine, fast-evaporating droplets.
KEEP EXPLORING
Related solutions and guides
FAQS
Questions we are often asked
How do I clean misting nozzles?
Soak in nozzle cleaner for 30–60 minutes, rinse and refit. Do not push pins or wires into the orifice.
How often should filters be changed?
Check annually at least; replace when the element darkens or pressure drop rises.
Do I need a water softener?
For hard borewell water, a calcium inhibitor or softener greatly reduces scaling.
LET'S DEFINE YOUR REQUIREMENT
Your application deserves the right system.
Share your operating conditions. Start with a conversation, not a pre-selected package.