Adiabatic pre-cooling for data centres and HVAC plants.
On the hottest days air-cooled condensers and dry coolers lose capacity just when IT and building loads peak. Adiabatic pre-cooling mists the intake air to keep plant within its design envelope.
Peak heat, peak load
Condenser and dry-cooler capacity falls as ambient rises. Pre-cooling the intake air restores headroom without adding refrigeration capacity.
What we pre-cool
- Air-cooled chillers
- Dry coolers and condensers
- VRF/VRV outdoor units
- Rooftop package units
Solutions for this industry
Adiabatic pre-cooling
Pre-cool intake air on chillers, condensers and VRF outdoor units.
High-pressure misting
Pump-driven 70 bar class systems for fine, fast-evaporating droplets.
How a TrueMist project runs
A structured conversation before any equipment is proposed.
- 01
Describe the problem
Tell us what is happening, where and when.
- 02
Assess the conditions
Area, airflow, humidity, water and power on site.
- 03
Define the system
Pump, nozzles, lines, filtration and controls sized to the duty.
- 04
Install & validate
Commissioning checks against the agreed objective.
Related solutions and guides
Questions we are often asked
Will misting harm condenser coils?
Droplets are sized to evaporate before the coil and treated water prevents scale.
Does it run all year?
No – only above a set ambient temperature, so water use is limited to peak periods.
Can it integrate with the BMS?
Yes – controls can accept enable signals and report status.
Your application deserves the right system.
Share your operating conditions. Start with a conversation, not a pre-selected package.