Mist and fog nozzles made for each application.
TrueMist designs, manufactures, tests and deploys mist and fog nozzles to suit each application – customisable for connection size, flow rate and material.

- Orifice
- 0.1–0.6 mm
- Material
- Brass / SS
- Orifice insert
- SS or ceramic
- Thread
- 10/24, 12/24
Smaller droplets, better cooling
Misting nozzles atomise pressurised water into aerosol particles that flash-evaporate. The smaller the droplets, the better the cooling. Nozzles are made of brass or stainless steel with a stainless or ceramic orifice.
We typically suggest a 0.2 mm orifice in dry climates and 0.15 mm for humid climates; orifices range from 0.1 mm to 0.6 mm. Our standard thread is 10/24, and we also supply 12/24 and other industry threads.
- Anti-drip nozzles that seal when pressure drops
- Push-fit low-pressure nozzles for simple kits
- Fog nozzles for humidification and greenhouses
- Nozzle unions, tees and end plugs
Cleaning blocked nozzles
Clogged nozzles with calcium build-up can be soaked in our nozzle cleaner for 30 minutes to an hour, rinsed and re-installed. Our nozzle series comes apart for easy cleaning and debris flushing. Adding a scaling (calcium-inhibitor) filter to the pump reduces build-up.
Products in this range
Add items to your enquiry list and request a quotation.
High Pressure Fog Nozzle
High Pressure Fog Nozzle with anti-drip function and ceramic orifice in Brass or Stainless Steel MoC.
High Pressure Mist Nozzle with Anti Drip
Anti drip mist nozzles are Fine spray and low flow atomizing stainless steel nozzles that can be hand…
Low Pressure Push fit mist nozzle
Outer Shell - SS316 Insert - Brass nozzle orifice - 0.1 to 2.0 mm operating pressure - up…
Mist nozzle for outdoor cooling
Most of us realise that we feel a little cooler on a foggy day, but why is it…
Related solutions and guides
Questions we are often asked
What orifice size should I choose?
Around 0.2 mm in dry climates and 0.15 mm in humid climates for cooling; other duties use 0.1–0.6 mm.
What is an anti-drip nozzle?
A nozzle with a check valve that closes when pressure falls, so lines do not drain and drip after shut-off.
Brass or stainless steel?
Brass suits most cooling; stainless suits corrosive, food or chemical environments.
Do you make custom nozzles?
Yes – connection, flow rate and material can be customised.
Your application deserves the right system.
Share your operating conditions. Start with a conversation, not a pre-selected package.



